More info>>>

KASON ( Your Partner for Screening and Processing Equipment ) The Kason Centri-Sifter is designed to operate only as a closed system, with products fed into the machine thorough an inlet pipe attached to the inlet of the Centri-Sifter, and is sold based on the representation that you will attach your own inlet pipe to the Centri-Sifter inlet. The attachment of the inlet pipe to the inlet is designed to serve as a guard against possible bodily injury. Complete Circular Vibratory Fluid Bed Systems Skid Mounted Ready To Process Greater performance in less space at lower cost than ever before possible. Kason fluid bed dryers, coolers, and moisturizers employ an innovative circular processing unit which is inherently stronger, lighter, and less costly to build and finish to sanitary standards than rectangular units having equivalent surface area. Because the circular fluid bed processor is also more compact, complete fluid bed systems can be pre-engineered and pre-configured on caster-mounted frames, ready for installation and start up. Moreover, Kason circular fluid bed processors maintain an unprecedented level of operating efficiency across a wide range of model sizes from 18 to 84 inches(460-2540mm) in diameter for laboratory and pilot plant testing as well as batch or high-volume in-line drying, cooling, or moisturizing of bulk foods, pharmaceuticals, and chemicals.  Kason Vibroscreen® circular vibratory screeners separate bulk solid materials from solids and slurries using multi-plane, inertial vibration that causes particles to pass through apertures in the screen or to travel across the screen surface in controlled pathways. The screeners range in diameter from 18" to 100" (460mm to 2540mm) and are offered with single or multiple screening decks, separating particles in one to five predetermined sizes ranging from 2" (50mm) to 400 mesh (37 microns). A wide range of models and specialized options satisfy a broad range of sifting, scalping, classifying, de-dusting and dewatering applications from the most simple to the most challenging, in capacities ranging from several pounds/kilograms to more than 30 metric tons per hour. All Kason circular vibratory screeners are offered in gravity-fed and in-line pneumatic models for batch or continuous operation, and are available to industrial, food, dairy and pharmaceutical standards. The screeners are offered in two configurations, distinguished by the number and location of imbalanced-weight gyratory motors employed to impart vibration 1. One imbalanced-weight gyratory motor mounted directly beneath the screening chamber (Standard Vibroscreen models) Stationary and mobile units are available in diameters from 18" to 100" (460mm to 2540mm) with single or multiple screening decks, yielding up to five precise particle classifications. The single gyratory motor of Standard Vibroscreen models is available with "E-Z Slide imbalanced weights, allowing rapid, tool-free adjustment of multi-plane, inertial vibration for maximum screening efficiency. 2. One or two imbalanced-weight gyratory motors mounted externally on opposites sides of the screening chamber (Flo-Thru Vibroscreen models) This Kason innovation minimizes height requirements, and enables the bottom outlet to be positioned directly below the top inlet, allowing material to fall vertically through the screen at high rates. The external location of gyratory motors also makes Flo-Thru models suitable for high temperature applications. Stationary and mobile units are available in diameters from 18" to 84" (460mm to 2135mm).